Screen Wipes,Microfiber Sticky Cleaner,Sticky Microfiber Lcd Screen Cleaner,Sticky Microfiber Cleaner East-Sunshine Textile Science And Technology Co., Ltd. , http://www.wxmicrofiber.com
Risk factors 1) Intensive stacking of cartons at workplaces The company has a large inventory of raw materials. Cardboard, semi-finished products and finished products are piled up in the workshop. When the product backlog is not delivered smoothly, and the equipment is shut down for maintenance, the products and semi-finished products are piled up densely, causing obstruction of the channels. At this time, as long as a non-extinguishing cigarette butts may cause a fire.
b) First in flammable and explosive products, oils. Printing inks, washing gasoline, power diesel, lubrication oil, etc. are all flammable products.
Second, the boiler. A burning boiler may explode when a part is overloaded. Even in the case of normal pressure, the pressure element itself may be defective, or it may be damaged due to improper use. It may also burst; the equipment will suddenly experience cold when it is hot, such as when there is a serious lack of water to supply cold water, causing the shell, Furnace burst.
Third, steel thin-walled cylinder preheating wheels. In the five-layer corrugated board production line, the steel thin-walled cylinder preheating wheel has a significant decrease in the mechanical properties of the material under high temperature conditions, and the elongation, elastic modulus, coefficient of linear expansion, and corrosion resistance also change significantly, resulting in poor management. , Operational errors or manufacturing defects can cause it to rupture or even explode.
Fourth, steam pipes and valve connections, pipe fittings, etc. Pressure pipes in the continuous production process, due to the effect of high temperature, high pressure can cause damage. Poor operation management or problems in the design, manufacture, and installation may lead to accidents.
c) Electricity violations cause potential damage to the switch due to improper electrical use of the seedlings. The buried wires are worn out or worn out. The wire connectors are loose and fall off, the wires are short-circuited, and the equipment grounding device is damaged. Sudden power cuts or sudden calls due to line faults are available. If it is not timely, it will cause misjudgment, misjudgment or misoperation, and it will easily lead to accidents.
D) Violation of the regulations to operate the cutter, most likely to injure the carton machinery. Mostly equipped with sharp cutting knives, the corrugated cardboard production line is equipped with a group of extremely sharp slitting knives; all the cutting equipment produced in the rear cardboard and box production are installed. There are sharp cutting blades and blades. Therefore, if the carton machinery is in violation of the operating procedures during production or maintenance, it is very easy to cause injury accidents.
V) Large cardboard production lines and auxiliary equipment during the production of bare driving parts Some cardboard production and printing equipment for heat dissipation, easy maintenance, equipment without protective cover, rotating parts exposed, if you violate the rules of operation may hurt.
6. Smoking or unauthorized ignition in the factory area is a major hidden danger for the carton enterprises.
The paper product is flammable and its ignition point is 130°C. However, at the production site, people often violate the prohibition, sneaking cigarettes, and throwing cigarette butts. Some units do not handle hot work permit. Although they have handled it, their duties are not fulfilled and management is not in place.
In addition to the above six unsafe factors, cartons manufacturing companies also need to find, control, and prevent them in practice so as to prevent them as much as possible.
Work Measures I) Safety First, Prevention First Understand the importance of safe production. Corporate leaders should place safety work first in production activities, and production should be subject to safety. (To be continued)
According to the hidden dangers of safety in our company and accidents in some carton enterprises in recent years, we deeply feel that carton enterprises are prone to all kinds of accidents. Relevant leaders must not be taken lightly, paralyzed, and must be highly valued, and safety work must be strengthened. To be implemented.
February 06, 2019